# Steel Plate Rolling Services

Ramco Fabricators rolls steel plate up to 1-1/4 inch thick and 10 feet wide, down to a 24 inch inside diameter, into cylinders, cones, and segments for fabricators, OEMs, and contractors across the Southeast and beyond. We have been rolling plate for our own [pressure vessels](https://ramcofabricators.com/asme-pressure-vessels) and [tanks](https://ramcofabricators.com/storage-tanks) since 1987, and we are glad to roll for other shops too! Send us your flat plate or let us supply it, and we will send back a formed part ready for your weld shop or a finished welded cylinder.

## What We Roll

-   Cylinders and shells, open seam or welded, tacked or fully welded and ground
-   Cones and transitions, concentric and eccentric
-   Segments and arcs for large-diameter rings and tank repairs
-   Pressure vessel shells rolled to ASME tolerances
-   Pipe and tube sleeves, stacks, ductwork, and chutes

![Steel plate being rolled on a 3-roll plate bending roll](https://ramcofabricators.com/images/rolling-plate.jpg) ![Rolled steel plate cylinder](https://ramcofabricators.com/images/rolling-plate-cylinder.jpg) ![Rolled steel cone segments](https://ramcofabricators.com/images/fab-cone-segments.jpg)

## Plate Rolling Capacity

- **Roll type:** 3-roll plate bending roll
- **Max thickness:** 1-1/4 in, carbon or stainless
- **Max plate width:** 10 ft
- **Min inside diameter:** 24 in
- **Max diameter:** up to 14 ft 8 in as a finished shell
- **Cones:** Yes
- **Materials:** Carbon and stainless every day and other alloys quoted on request
- **Material supply:** Customer-supplied or quoted furnished

## Frequently Asked Questions

### How wide and how thick a plate can you roll?

Up to 10 feet wide and 1-1/4 inch thick, with a minimum inside diameter of 24 inches. Call us with the thickness, width, and diameter and we can tell you in a minute whether it fits.

### What is the tightest cylinder you can roll?

24 inches inside diameter. Below that, we can often fabricate the part another way, so give us a call and ask!

### Can you roll stainless?

Yes! We roll stainless to the same 1-1/4 inch thickness as carbon steel. Stainless and carbon are the two materials we roll every day.

We will gladly prepare a customized quote for you.

[Request a Quote](https://ramcofabricators.com/contact-us)

---

Ramco Fabricators LLC, 9501 West Market Street, Colfax, NC 27235. Phone (336) 996-6073. Email Ramco@RamcoFabricators.com.
Canonical page: https://ramcofabricators.com/plate-rolling